top of page
Application Instruction

The installation of STYX watch protection film is not as complicated as you might think. Follow the instructions in the video and your watches will be protected with STYX in just 30 minutes

Welcome to STYX Watch Protection Film, and this is how you can apply your STYX kit at home.


First, let’s take a look at what’s inside your kit. You will find an envelope containing instructions, the watch protection film, and a pair of tweezers. You will also find a microfiber towel, and an alcohol wipe that you can use to clean the watch surface before applying the film.


To begin, clean the watch surface with the provided alcohol wipe to remove any dirt or oils. Pick up one piece of the paint protection film using tweezers, then wet the film and watch surface water using a misting bottle. If you don’t have a misting bottle, you can also immerse the film in water.


Gently place the protection film on the corresponding watch component, then squeeze down and remove any moisture that might be trapped under the film to secure it.


Continue the process with the rest of the protection film, and voila, your watch is now ready for its next adventure. For optimal results, let the film dry for 24 hours before wearing your STYX-protected timepiece.

  • Clean watch surface thoroughly with alcohol wipe [1] , then repeat with alcohol wipe [2] .

  • Adjust the film until it is perfectly aligned with the corresponding watch component.

  • Remove any excess moisture trapped under the film, then wait one minute for the film to achieve complete adhesion.

  • Repeat steps 2-4 with the remaining film.

  • After installation, clean timepiece with the provided microfiber towel.

  • Any residue moisture on or under the film will dissipate within 12 hours.


  • Using the provided tweezers, remove a piece of watch protection film from its backing, then immerse in water. 

bottom of page